Flintlock
From Wikipedia, the free encyclopedia
 |
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (April 2009) |
 |
It has been suggested that Flintlock mechanism be merged into this article or section. (Discuss) |
Flintlock is the general term for any firearm based on the flintlock mechanism. The term may also apply to the mechanism itself. Introduced about 1630, the flintlock rapidly replaced earlier firearm-ignition technologies, such as the matchlock and wheellock mechanisms. It continued to be in common use for over two centuries, replaced by percussion cap and, later, cartridge-based systems in the early-to-mid 19th century. The Model 1840 U.S. musket was the last flintlock firearm produced for the U.S. military [1] although there is evidence obsolete flintlocks were seeing action in the earliest days of the American Civil War In fact, during the first year of the war, the Army of Tennessee (Confederacy) had over 2,000 flintlock muskets in service. While technologically obsolete, flintlock firearms have enjoyed a renaissance among black powder shooting enthusiasts and many fine flintlock rifles and pistols are being made today.
Contents |
[edit] Subtypes
Flintlocks may be any type of small arm: long gun or pistol, smoothbore or rifle, muzzleloader or breechloader. Most flintlock firearms are single-shot muzzle loaders. Because of the time needed to reload (the fastest experts could reload a smooth-bore muzzle-loading musket in as little as fifteen seconds)these weapons were sometimes produced with two, three, four or more barrels for multiple shots, but these designs tended to be expensive to make and unreliable. It was more cost-effective and more reliable to simply carry several single-shot weapons instead.
Flintlock muskets were the mainstay of European armies between 1660 and 1840. A musket was a muzzle-loading smoothbore long gun that was loaded with a round lead ball, but it could also be loaded with shot for hunting. For military purposes, the weapon was loaded with ball, or a mixture of ball with several large shot, and had an effective range between 40 and 100 meters. Smoothbore weapons that were designed for hunting birds were called "fowlers". They tended to be of large caliber. They usually had no choke, so they could also be used to fire a ball.
Some flintlock hunting arms had rifled barrels. Rifling is the process of cutting spiral grooves into the inside of the barrel. These grooves will cause a tight-fitting projectile to spin, which stabilizes its flight by the gyroscopic principle. Rifles are more accurate and have longer effective ranges than smooth-bore muskets but they take more time to load, due to the tight-fitting ball. The first rifled arms were introduced about 1500. Versions made in Germany for hunting large game such as boar had barrels about 50-75 centimeters long. When German immigrants settled in America, particularly in Pennsylvania, they adapted their technology to the type of game available and the demands of the Indian trade, and built the long rifle, an improvement on the small game rifles used in Europe. This weapon, known as the "Pennsylvania Rifle" or "Kentucky Rifle," has a barrel 90 to 115 centimeters long, and carefully loaded and shot, will be accurate up to 300 meters.
Flintlock pistols were used as self-defense weapons and for duelling, and as a cavalry arm. Their effective range was very short, and they were frequently used as an adjunct to the sword or cutlass. Pistols were usually smoothbore although rifled pistols were produced.
[edit] History
French courtier Marin le Bourgeoys made the first firearm incorporating a true flintlock mechanism for King Louis XIII shortly after his accession to the throne in 1610[citation needed]. The development of firearm lock mechanisms had proceeded from matchlock to wheellock to snaplock to snaphance and miquelet in the previous two centuries, and each type had been an improvement, contributing some design features which were useful. Le Bourgeoys fitted these various features together to create the flintlock mechanism. The new system quickly became popular, and was known and used in various forms throughout Europe by 1630.
Various breech-loading flintlocks were developed starting around 1650. The most popular action has a barrel which was unscrewed from the rest of the gun. Obviously this is more practical on pistols because of the shorter barrel length. This type is known as a Queen Anne pistol because it was during her reign that it became popular (although it was actually introduced in the reign of King William III). Another type has a removable screw plug set into the side or top or bottom of the barrel. A large number of sporting rifles were made with this system, as it allowed easier loading compared with muzzle loading with a tight fitting bullet and patch. One of the more successful was the system built by Isaac de la Chaumette starting in 1704. The plug passed completely through the barrel and could be opened by 3 revolutions of the triggerguard, to which it was attached. The plug stayed attached to the barrel and the ball and powder were loaded from the top. This system was improved in the 1770s by Colonel Patrick Ferguson and 100 experimental rifles used in the American Revolutionary War. The only two flintlock breechloaders to be produced in quantity were the Hall and the Crespi. The first was invented by John Hall and patented c. 1817 [2]. It was issued to the US Army as the Model 1819 Hall Breech Loading Rifle [3] The Hall rifles and carbines were loaded using a combustible paper cartridge inserted into the upward tilting breechblock. Hall rifles leaked gas from the often poorly fitted action. The same problem affected the muskets produced by Giuseppe Crespi and adopted by the Austrian Army in 1771. Nonetheless, the Crespi System was experimented with by the British during the Napoleonic Wars, and percussion Halls guns saw service in the American Civil War.
[edit] Method of operation
- A cock or hammer tightly holding a sharp piece of flint is rotated to half-cock;
- The operator loads the gun, usually from the muzzle end, with black powder followed by shot or a round lead ball, usually wrapped in a paper or cloth patch, all rammed down with a ramrod), that is usually stored on the underside of the barrel;
- The flash pan is primed with a small amount of very finely ground gunpowder, and the flashpan lid or frizzen is closed;
The gun is now in a "primed and ready" state, and this is how it would typically be carried while hunting or if going into battle. A safety notch at half-cock locks the cock to prevent it from falling by pulling the trigger.
To fire:
- The cock or hammer is moved from half-cock to full-cock, releasing the safety lock on the cock;
- The gun is aimed and the trigger is pulled, releasing the cock or hammer holding the flint;
- The flint strikes the steel frizzen, a piece of steel on the priming pan lid, opening it and exposing the priming powder;
- The contact between flint and frizzen produces a shower of sparks that is directed into the gunpowder in the flashpan;
- The powder ignites, and the flame passes through a small hole in the barrel (called a vent, or touchhole) that leads to the combustion chamber, igniting the main powder charge there; and the gun discharges.
The British army used paper cartridges to load their weapons.[4] The powder charge and ball were instantly available to the soldier inside this small paper envelope. When commanded, he:
- Moved the cock to the half-cock position;
- Tore the cartridge open with his teeth;
- Poured a small amount of powder into the flashpan;
- Closed the frizzen to keep the priming charge in the pan;
- Poured the rest of the powder in the cartridge down the muzzle and stuffed the cartridge in after it;
- Took out his ramrod and rammed the ball (still in the cartridge) all the way to the breech;
- Returned his ramrod and shouldered his weapon. Now he is ready to place the weapon on full cock and fire when commanded.
[edit] Cultural impact
The flintlock mechanism was in main use for both military and civilian use for over 200 years. Not until the Reverend Alexander John Forsyth, a Scottish minister, invented the rudimentary percussion cap system in 1807 did the flintlock system begin to decline in popularity. The percussion-cap system replaced the flintlock's flint and flashpan with a waterproof copper cap that created a spark when struck. The percussion ignition system was more weatherproof and more reliable than the flintlock. The transition from flintlock to percussion cap was a slow one, even at that, since the percussion system was not widely used until around 1830. The flintlock continued in common use until the time of the American Civil War.
As a result of the flintlock's long active life, it has left lasting marks on the language and on drill and parade. Terms such as: "lock, stock and barrel," "going off half-cocked" and "flash in the pan" remain current in the English language. In addition, the weapon positions and drill commands that were originally devised to standardize carrying, loading and firing a flintlock weapon remain the standard for drill and display (see manual of arms).
 A flintlock musket being fired |
 Reproduction flintlock musket detail |
 ignition sequence |
[edit] See also
[edit] Notes
- Flayderman's Guide to Antique Firearms and Their Values 7th Edition, by Norm Flayderman 1998 Krause Publications ISBN 0873493133, 9780873493130
